Mod 1. Increasing the footwell width by 36mm.
Firstly, I would like to thank Brent for his detailed instructions on increasing the footwell width in his blog.
BH 7 is marked indicating the location of the internal cleats, footwell side Pannels, footwell base, lower cleat and the longitudinal cleats. (Check Brent's blog for detailed instructions on how to increase the footwell.
BH 8 is cut 18mm either side to the new wider width.
The 6mm ply footwell sides are cut as per plans but I increased the length by approximately 10mm, I do this to allow minor adjustments to ensure a neat fit.
No comments:
Post a Comment