More Filleting
Well after a four-week break I'm back to the build and that means more fillets. It can't be underestimated the time you spend making fillets, did I mention fillets.
So armed with the following arsenal of filleting weapons it was time to attack the frames and bulkheads. I'll leave the bottom to hull side fillets to last, I should have them down pat by then.
After many hours and many beers, the frame and bulkhead fillets are done.
Now it's time to do the larger bottom to hull side fillets. I'll take extra care making these fillets as they are exposed and seen from inside the cabin.
The sections are thoroughly sanded, cleaned and masked up.
The joint is thoroughly wetted out prior to laying the fillets and peel apply rolled over the fillets.Thats the end of the Sixth month of construction...........
I wish you fast recovery after illness!
ReplyDelete